Welding Principle:

Hot plate welding machine is mainly through a temperature-controlled heating plate to weld plastic parts; welding, the heating plate is placed between the two plastic parts, when the workpiece is close to the heating plate, the plastic begins to melt; in the first set up after the heating time has passed, the plastic on the surface of the workpiece will reach a certain degree of melting, at this time, the workpieces to the two sides of the separation of the heating plate has been opened, followed by the merger of the two workpieces together, when the hot plate to stop the After the role, let the pressure continue for a few seconds, so that the solidification of the molding, so that itinerary a solid molecular chain, to achieve the purpose of welding, welding strength can exceed the strength of the raw material, the entire welding process is completed;

Equipment features:

• Can be used for workpieces of different sizes, no area limitation.

• Can be applied to any welding surface, no special requirements (such as flat, curved surface can be).

• Welding surface can allow plastic margin compensation, welding strength is guaranteed.

• The welding process can be shaped by the fixture, the deformation of the product is not very high requirements

• The welding process is simple, (mainly temperature, time, depth, etc.).

• After welding, the product has good airtightness, reliable interface and high strength.

• The driving mode can be selected from pneumatic, hydraulic and servo motor drive.